Discussions

Is there anyone in brandon that does sewing machine repair other than brandon sewing center?  
It is a small issue, but I can't seem to figure it out, even with extensive googling...the top thread will not connect with the bottom bobbin thread..I've changed the needle and made sure it is threaded correctly..It is a Singer Simple portable sewing machine...I only paid $100 new for it, and so starting price to look at the machine is $75-100 is too much for me...  
anyone have any ideas, please let me know...thanks

I'm no expert and I know you googled did you google the Sewing Society it could be one of those issues . I do sew a bit sometimes it's the littlest thing that can cause issues . good luck

Happened to me once I absentmindedly put needle in wrong way and had the same issue. Took me a while to realize what I’d done ..  
I know you said you googled it but just thought I suggest checking needle ..

Are you only having this problem since changing the needle, or did you change the needle trying to solve the problem?  
 
If it's only since changing the needle, try a different needle or like mentioned above, make sure it's installed properly.  
 
Check your tensioner. Is it not catching, or is it breaking?  
 
Take it apart and clean it, especially under the feed dogs. Your manual should have the instructions on how to do this. If you don't have a manual, most are available online.  
 
Once you eliminate all those steps, then it's probably a timing issue. That's more complicated to solve, but not impossible. There's some good Youtube vids that explain the steps for that. My husband changed a blown gear on my Singer and then had to reset the timing, he was able to do it all following YouTube.

Chances are either the needle is not put in far enough or it is in too far. Most sewing machines have the needle hole drilled to exact depth, meaning you put the needle into the hole as far as it will go before tightening it. But some models don't have that feature.  
If the needle is even a millimeter too long then it can miss the bobbin threading loop. Ditto if the needle is too short.  
Try adjusting your needle depth. Put a scrap of cloth under the presser foot and turn it by hand to see if it is catching the bobbin thread. This is especially important if the needle is hanging too low (too long), it may bend or break the needle.

did you sove the issue ?

ruby red...I have not solved the issue yet...still trying different things

still looking for someone who repairs sewing machines other than brandon sewing center....thanks

if you have transport you could take it into Mama Bears quilts and see if they can help, or possibly Fabricland.  
Perhaps 'phone Mamas first I'm sure some of the quilters will have come across this problem.

Have you tried phoning Fabricland 2047278981 on Rosser Av see if they know someone locally.

Did you check that the bobbin is in correctly...it needs to go in with the thread coming up counter clockwise

I phoned mama bears quit shop, and fabricland, and they all take their machines to brandon sewing center..($75 -$125) to look at it...  
I am still trying ideas suggested in other posts...I have put in a new needle, (flat part to the back) new bobbin, still trying other ways, and still googling...I was at the dentist this afternoon, and asked some hutterite women waiting for their ride, and they said Brandon sewing center..so , I'm still trying to get it to work..Will post it when I finally figure it out...thanks for all the suggestions.

I am not a sewing machine mechanic but willing to have a look at it...pm me  
It often is something minor & seems a waste to pay $75/100 if you don’t have to.  
 
Edited by LJM, 2021-03-10 14:57:16

Sorry...Tried but unable to access my account to retrieve your message....waiting for reply from ebrandon for assistance

ok lim...I sent you a pm

It’s usually pretty simple solution ,I would have a look at it if you want .I fixed industrial machines in my younger years .I have tuned up smaller home machines as well .  
 
Edited by boots40, 2021-03-11 19:51:06

I sent you a pm

My first experience with my machine had the same issue. When I took it for service it turned out the bobbin was not loaded properly. Once the pieces were taken out , reset and the bobbin put back in the problem was resolved...might be worth a try.

My repair issue with my sewing machine has been solved. a man who used to service sewing machines for brandon sewing factory repaired my machine and many thanks to him...also thanks for all the helpful ideas from ebrandonites....

what was the problem? And the solution.  
Glad it has been solved.

HAPPYCAMPER is busy sewing or camping. LOL

re: vegimite  
 
he didn't tell me the problem or how he fixed it...he just fixed it and it's working perfectly now...happy days...no camping until may long...

I have the exact same model and the exact same problem as you...can I get the contact info for the guy who solved your problem? I am really stalled and have some projects to finish. I have replaced needle, re-threaded, and watched YouTube videos all to no avail!

hi malo....I can't give out his phone number due to privacy issues, but he checks ebrandon all the time and if he is interested, he will contact you...thanks

Hi - I have a Singer Simple sewing machine with the exact same problem as happycamper.  
 
Please email me at malo@wcgwave.ca or text 204-761-0313 as I would really like to get my machine running again. Thank you!